Most frequent questions
Can Quookers be installed in any kitchen? Installation
Quookers can be fitted into new kitchens and also retrofitted into existing ones. To install a Quooker, all that is required is space for the tank, a 13 amp power socket, access to waste pipe and a cold water supply underneath the work surface within 500mm. A minimum incoming cold water pressure of 2 bar is required.
The Quooker PRO3 tank requires 400mm of height space and is 150mm in diameter. The Quooker PRO3E tank requires 450mm of height space and is 150mm in diameter. The Quooker PRO7 and Combi 2.2 tanks require 470mm of height space and are 200mm in diameter. The Quooker PRO7E and Combi 2.2E tanks require 520mm of height space and are 200mm in diameter.
The Quooker will not fit under the sink, what can I do? Installation
You can position the Quooker tank up to a maximum of 2 metres away from the boiling-water tap with the help of an extension hose. Extension hoses can be ordered together with the Quooker as an optional extra and they are available in the following lengths: 30, 60, 100 and 150cm.
If you have already purchased your Quooker you can order the extension hoses as a separate item directly from our service department. When ordering, please specify the tap style you have selected, as connections vary between our single tap range and the Nordic and Fusion range. The service team can be contacted via email@example.com by calling 0207 9233355 (select option 3 for Service). Please have your Quooker's serial number ready – it is located at the side of the tank near the top.
Mounting brackets are also available for the PRO3, PRO7 and COMBI tanks to assist in positioning the Quooker efficiently. The stainless steel mounting bracket is especially useful for fitting tanks in kitchens with under-sink drawer units.